| The CB-2000 ... Where it all started |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
The CB-2000... Where it all started! The 2000 is a comfortable male chastity device that is suitable for long-
term wear. They are comfortable, easy to stay clean in, and appealing to look at. The CB-2000 consists of
2 parts, commonly referred to as the "Cuff Ring" and the "Cage".
The cuff rings are solid. The Full Package comes with all five solid rings, in sizes 1-1/2", 1-5/8", 1-3/4",
1-7/8" and2". You can experiment to find the one that fits you the best.
A locking pin inserts through the backside (closest to the body) of the cuff ring and will insert into the cage
portion. Once inserted into through the locking pin hole in the cage, you will put the lock on that will secure
the device to the male. There are three different lengths of locking pins included in the full package, plus spacers.
The cage has two alignment posts that fit into the cuff ring. They make the whole unit stable during daily wear and especially during arousals and
partial erections.
Getting the right fit:
To get the right fit, you will experiment to find the right cuff ring, spacers, and locking pin. A cuff ring that is too tight will cause swelling of the
scrotum. Even a correct-fitting cuff ring will cause a little swelling because it is trapping the genitals and causing some tightness.
The spacers will create a space between the cuff ring and the cage. If the cage is pulled too close to the scrotum, there will be swelling. To make the
CB-2000 most secure, get a good tight fit on the cuff ring, and maybe a 1/4" or 3/8" spacer. The cuff ring goes behind the ball sack and over the
penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and
locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of
side cutter pliers and smooth the edges with an emery board.
Dimensions:
The Center Length of the Cage Portion is 21/2". The inside diameter is 1 1/2". Please take the size into consideration when ordering. To compare
the CB-2000 with the CB-3000 and The Curve, go to the Products page and scroll down to the comparison chart.
Interchangeable:
The CB-2000 tube is interchangeable with the rings, spacers, and pins of the CB-3000 or The Curve. If you already have the CB-3000 or The Curve,
just purchase the CB-2000 cage only and use it with your other rings and spacers.
Locks:
A brass padlock with one key is included plus there are 5 plastic locks which are individually numbered to assure tamper proof wear. Once the plastic
locks have been engaged the only method of removal is to cut the lock itself, they cannot be re-attached or glued back in place. Plastic locks make the
CB-2000 suitable to pass through metal detectors.
The CB-2000 Full Package comes with:
Chastity Tube
5 different sized rings that fit behind the sack
Five individually numbered plastic locks
One brass padlock with one key
Three different sized locking pins
Five different sized spacers
The CB-2000 Cage Alone
There are no extras, just the tube portion. The reason that someone may just purchase the tube is
that the spacers, pins, and rings of the CB-2000, CB-3000, and The Curve are interchangeable. So,
if you had the CB-3000 or The Curve in the past, you can purchase just the tube and "upgrade".
term wear. They are comfortable, easy to stay clean in, and appealing to look at. The CB-2000 consists of
2 parts, commonly referred to as the "Cuff Ring" and the "Cage".
The cuff rings are solid. The Full Package comes with all five solid rings, in sizes 1-1/2", 1-5/8", 1-3/4",
1-7/8" and2". You can experiment to find the one that fits you the best.
A locking pin inserts through the backside (closest to the body) of the cuff ring and will insert into the cage
portion. Once inserted into through the locking pin hole in the cage, you will put the lock on that will secure
the device to the male. There are three different lengths of locking pins included in the full package, plus spacers.
The cage has two alignment posts that fit into the cuff ring. They make the whole unit stable during daily wear and especially during arousals and
partial erections.
Getting the right fit:
To get the right fit, you will experiment to find the right cuff ring, spacers, and locking pin. A cuff ring that is too tight will cause swelling of the
scrotum. Even a correct-fitting cuff ring will cause a little swelling because it is trapping the genitals and causing some tightness.
The spacers will create a space between the cuff ring and the cage. If the cage is pulled too close to the scrotum, there will be swelling. To make the
CB-2000 most secure, get a good tight fit on the cuff ring, and maybe a 1/4" or 3/8" spacer. The cuff ring goes behind the ball sack and over the
penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and
locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of
side cutter pliers and smooth the edges with an emery board.
Dimensions:
The Center Length of the Cage Portion is 21/2". The inside diameter is 1 1/2". Please take the size into consideration when ordering. To compare
the CB-2000 with the CB-3000 and The Curve, go to the Products page and scroll down to the comparison chart.
Interchangeable:
The CB-2000 tube is interchangeable with the rings, spacers, and pins of the CB-3000 or The Curve. If you already have the CB-3000 or The Curve,
just purchase the CB-2000 cage only and use it with your other rings and spacers.
Locks:
A brass padlock with one key is included plus there are 5 plastic locks which are individually numbered to assure tamper proof wear. Once the plastic
locks have been engaged the only method of removal is to cut the lock itself, they cannot be re-attached or glued back in place. Plastic locks make the
CB-2000 suitable to pass through metal detectors.
The CB-2000 Full Package comes with:
Chastity Tube
5 different sized rings that fit behind the sack
Five individually numbered plastic locks
One brass padlock with one key
Three different sized locking pins
Five different sized spacers
The CB-2000 Cage Alone
There are no extras, just the tube portion. The reason that someone may just purchase the tube is
that the spacers, pins, and rings of the CB-2000, CB-3000, and The Curve are interchangeable. So,
if you had the CB-3000 or The Curve in the past, you can purchase just the tube and "upgrade".
| Order a CB-2000 Full Package and purchase all three KSD-G2's valued at $23.50 for only $8.50, plus Free Priority Mail shipping (2-3 days) in the U.S. valued at $8.00. 2) or get the same deal on the KSD-G2's and pay $23.00 for Express USPS Express! (some remote areas can take 2 days if you are far away from a major airport) Other shipping options available for our Canadian and Overseas friends - go to FAQ for shipping rates and rules. |
| CB-2000 Full Package |
| If you order all three KSD-G2's with the Full Package, your total will be $88.45 with FREE Priority Shipping. We will adjust your total when we process your credit card. If you pay by PAYPAL and you want the KSD-G2's, you need to send an additional amount of $8.50 to info@keptforher.com. |
| A great starter chastity device or have fun switching between the CB-2000 and any of our other male chastity devices! |
| Close Out Prices on CB-2000's. Limited Quantities on Discontinued Line We are all out of CB-2000s. |