| Measuring for the KSD-G2 Get the right fit to assure your security and her peace of mind! |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| You owe it to your Keyholder to show her your devotion and love by staying safe and secure in your chastity device fitted with a personal KSD-G2. You will be in total chastity, with your attention now focused on how you may please your Keyholder. |
How to measure yourself
When you purchase as set of KSD-G2's you will receive all three sizes. To help you figure out which size is right for you, we
provide the following helps.
When your shaft is soft (flaccid), take a ruler and place it across the shaft. Line up one edge of the ruler with an outer edge of
the shaft. While you are looking down, make sure that the edge of the ruler and the outer edge of the shaft are really lined
up. Now, without pressing down on the ruler or “rolling” the ruler, hold the ruler level and look to the other outer edge of
your shaft and eye up the measurement.
Whether you take your measurement in metric or standard, that’s OK. The “A” size KSD-G2 is meant to fit men’s soft shaft
sizes of 1-1/2” width or about 38mm. The “B” size KSD-G2 is meant to fit men’s soft shaft sizes of 1-3/8” width or about
35mm. The "C" size is meant to fit men's soft shaft sizes of 1-1/4" or about 31.7mm.
Altering the KSD-G2
The KSD-G2 is made of a durable, light-weight plastic that is easy to alter. If you are between sizes or you ordered the
smallest size and realize that you need it to be a bit larger, not a problem! Here’s what to do.
Take some medium grit sandpaper (80 grit or so) and wrap a piece around one or two fingers. Now take the sandpaper and
begin to work it around the inside of the KSD-G2 large hole. The idea is to shave off some plastic as evenly as possible.
Do not take off too much. To start with, only take off enough to where the plastic dust would lightly cover the face of a
dime. Trust us, taking off a little bit of plastic makes a big difference. If you take off too much, there is no way to correct the
problem other than ordering another one.
After you have used the medium grit, take some fine grit (120 grit then 400 grit) and smooth the inside out a bit. Put it back
on and wear it for a day or two and see what happens. The main way you will know if it is too tight is if you have problems
urinating. Otherwise, it is supposed to fit tight!
When you purchase as set of KSD-G2's you will receive all three sizes. To help you figure out which size is right for you, we
provide the following helps.
When your shaft is soft (flaccid), take a ruler and place it across the shaft. Line up one edge of the ruler with an outer edge of
the shaft. While you are looking down, make sure that the edge of the ruler and the outer edge of the shaft are really lined
up. Now, without pressing down on the ruler or “rolling” the ruler, hold the ruler level and look to the other outer edge of
your shaft and eye up the measurement.
Whether you take your measurement in metric or standard, that’s OK. The “A” size KSD-G2 is meant to fit men’s soft shaft
sizes of 1-1/2” width or about 38mm. The “B” size KSD-G2 is meant to fit men’s soft shaft sizes of 1-3/8” width or about
35mm. The "C" size is meant to fit men's soft shaft sizes of 1-1/4" or about 31.7mm.
Altering the KSD-G2
The KSD-G2 is made of a durable, light-weight plastic that is easy to alter. If you are between sizes or you ordered the
smallest size and realize that you need it to be a bit larger, not a problem! Here’s what to do.
Take some medium grit sandpaper (80 grit or so) and wrap a piece around one or two fingers. Now take the sandpaper and
begin to work it around the inside of the KSD-G2 large hole. The idea is to shave off some plastic as evenly as possible.
Do not take off too much. To start with, only take off enough to where the plastic dust would lightly cover the face of a
dime. Trust us, taking off a little bit of plastic makes a big difference. If you take off too much, there is no way to correct the
problem other than ordering another one.
After you have used the medium grit, take some fine grit (120 grit then 400 grit) and smooth the inside out a bit. Put it back
on and wear it for a day or two and see what happens. The main way you will know if it is too tight is if you have problems
urinating. Otherwise, it is supposed to fit tight!
|