| what's new? Exciting developments at Kept For Her |
| Kept For Her is still the only place in the USA where you can purchase the KSD-G2 and Her Delight! |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
7-24-08
The tooling was completed and arrived at the injection molding company on 7-17. I was at the company on 7-18 to
meet with the production staff. Later in the day they ran a test of the mold and some types of plastic that we
selected. I received a call that the ejector pins were not properly pushing the newly formed parts out of the mold
and thus causing deformities. The mold was shipped back to the tooling company.
The repaired mold arrived at the molding company on 7-24. They will run the test articles on 7-29 and I will have
the parts to review by 7-31. The company has still committed to have our full production run by August 8. That is
why we do not have any pictures up, because we were going to take pictures of the test items which would be just
as good as the final product. We will post pics as soon as possible.
7-8-08
We heard from the injection molding company today. The tooling for the KSD-G3 will be completed on 7-14-08.
Somewhere between 7-16 and 7-18 they will run a test batch. I will be there to check the product against blueprints.
Providing that all is well with the tooling and the test articles are according to specifications, they said that I will have my
products by August 8 at the latest. We will have them up on the site to pre-order sometime during the week of 7-21. We
will have pictures on the site at that time.
6-8-08
Several men have taken part in our beta testing of the KSD-G3, using the most recent prototypes. Each man has reported
that the G3 is totally secure, comfortable, very easy to put on and take off, and did I say totally secure?
We will sign a contact on 6-9-08 to start the design of the tooling. The company guarantees the tooling to be completed
in 5-6 weeks. The injection molding company will start production within one week after the tooling is completed.
The KSD-G3 will come in clear, red and black. There will be three sizes. In fact, we have all three sizes being tested
currently with equal success.
The G3 will be on the market the week or two of August. We will have pictures on the site in a couple of weeks.
5-24-08
I have made three revisions to the G3 since I last wrote. I believe we are done with the design. I have been wearing the
latest prototype that I picked up on 5-23-08 and it is very comfortable, secure and safe.
I have sent the CAD files to four companies to receive bids on the tooling for the injection molds. I should have all bids
back by 5-30-08 and be able to select a company to make the molds. Most of the companies say that they will have the
molds done in 4-6 weeks and can start production immediately afterwards. So, it looks like we are closer to a late July or
early August. Be patient, you will not be disappointed.
And you Keyholders, we have designed the G3 to give you the confidence that your man is secure... just for You!!
5-3-08
I had modifications done to the previously mentioned prototype and picked up the new one on 5-2-08. This is excellent!
It goes on after you have on the back ring, locking pin/spacer and are inside the tube ready to be locked. It is totally
comfortable. I have tried several times, very hard, to pull out. I truly cannot, even with lotion on. This looks very
promising. I will test it for a few more days.
I have one more slight modification that I want to try but the designer is out until 5-12-08. He can get the modification
done that day and a new prototype made and I can pick it up on that day.
I will compare it against this current one. I have located an injection mold company that supposedly will give a very fast
turn around time on making the molds and then running production. They should be ready for purchase by mid-June.
4-24-08
I picked up the KSD-G3 prototype for the CB-6000 today. I had to do some minor modifications to it but it is a very nice
device. It will be tested for the next several days under a variety of "conditions" to see how it goes. So far it seems very
effective. Look for another update early next week.
4-17-08
The final design for the KSD-G3 for the CB-6000 will be completed on 4-18-08. A prototype will be created by early the
next week. This prototype will be tried out. If all is successful then we will go into production. We are behind schedule
but we want this to be right the first time. This G3 will be a totally different and new design from the KSD-G2.
We do not have plans as of yet to update the design of the G2 for the CB-2000, CB-3000 and Curve. That might happen
in the future but no immediate guarantees.
Thank you for all of your patience. We have had hundreds of requests about the G3!!
________________
Curiosity Got The Best Of Us - We had some extra time on our hands so we thought that we would see how many
states and countries the KSD-G2 has sold in so far. (We were asked the other day for an exact number of units sold. All
we disclosed is that we have sold several thousand.) We launched our web site on October 16, 2004 and here's the results
as of April 24, 2006:
USA: AK, AL, AR, AZ, CA, CO, CT, DC, FL, GA, HI, ID, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS,
MT, MS, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TX, TN, UT, VA, VT, WA, WI, WV,
WY
Overseas: Argentina, Australia, Belgium, Brazil, Canada, Chile, China, England, Faulkland Islands, France, Germany,
Iceland, Ireland, Israel, Italy, Japan, South Korea, Netherlands, Newfoundland, New Zealand, Norway, Poland, Puerto
Rico, Russia, Saudi Arabia, Scotland, South Africa, Sweden, Switzerland
THANK YOU SO MUCH TO OUR MANY CUSTOMERS!!!
_________________
Six Companies As International Distributors - There are now six companies carrying the KSD-G2 overseas. Two are
in the United Kingdom, Denmark, Germany, Japan and The Netherlands.
The tooling was completed and arrived at the injection molding company on 7-17. I was at the company on 7-18 to
meet with the production staff. Later in the day they ran a test of the mold and some types of plastic that we
selected. I received a call that the ejector pins were not properly pushing the newly formed parts out of the mold
and thus causing deformities. The mold was shipped back to the tooling company.
The repaired mold arrived at the molding company on 7-24. They will run the test articles on 7-29 and I will have
the parts to review by 7-31. The company has still committed to have our full production run by August 8. That is
why we do not have any pictures up, because we were going to take pictures of the test items which would be just
as good as the final product. We will post pics as soon as possible.
7-8-08
We heard from the injection molding company today. The tooling for the KSD-G3 will be completed on 7-14-08.
Somewhere between 7-16 and 7-18 they will run a test batch. I will be there to check the product against blueprints.
Providing that all is well with the tooling and the test articles are according to specifications, they said that I will have my
products by August 8 at the latest. We will have them up on the site to pre-order sometime during the week of 7-21. We
will have pictures on the site at that time.
6-8-08
Several men have taken part in our beta testing of the KSD-G3, using the most recent prototypes. Each man has reported
that the G3 is totally secure, comfortable, very easy to put on and take off, and did I say totally secure?
We will sign a contact on 6-9-08 to start the design of the tooling. The company guarantees the tooling to be completed
in 5-6 weeks. The injection molding company will start production within one week after the tooling is completed.
The KSD-G3 will come in clear, red and black. There will be three sizes. In fact, we have all three sizes being tested
currently with equal success.
The G3 will be on the market the week or two of August. We will have pictures on the site in a couple of weeks.
5-24-08
I have made three revisions to the G3 since I last wrote. I believe we are done with the design. I have been wearing the
latest prototype that I picked up on 5-23-08 and it is very comfortable, secure and safe.
I have sent the CAD files to four companies to receive bids on the tooling for the injection molds. I should have all bids
back by 5-30-08 and be able to select a company to make the molds. Most of the companies say that they will have the
molds done in 4-6 weeks and can start production immediately afterwards. So, it looks like we are closer to a late July or
early August. Be patient, you will not be disappointed.
And you Keyholders, we have designed the G3 to give you the confidence that your man is secure... just for You!!
5-3-08
I had modifications done to the previously mentioned prototype and picked up the new one on 5-2-08. This is excellent!
It goes on after you have on the back ring, locking pin/spacer and are inside the tube ready to be locked. It is totally
comfortable. I have tried several times, very hard, to pull out. I truly cannot, even with lotion on. This looks very
promising. I will test it for a few more days.
I have one more slight modification that I want to try but the designer is out until 5-12-08. He can get the modification
done that day and a new prototype made and I can pick it up on that day.
I will compare it against this current one. I have located an injection mold company that supposedly will give a very fast
turn around time on making the molds and then running production. They should be ready for purchase by mid-June.
4-24-08
I picked up the KSD-G3 prototype for the CB-6000 today. I had to do some minor modifications to it but it is a very nice
device. It will be tested for the next several days under a variety of "conditions" to see how it goes. So far it seems very
effective. Look for another update early next week.
4-17-08
The final design for the KSD-G3 for the CB-6000 will be completed on 4-18-08. A prototype will be created by early the
next week. This prototype will be tried out. If all is successful then we will go into production. We are behind schedule
but we want this to be right the first time. This G3 will be a totally different and new design from the KSD-G2.
We do not have plans as of yet to update the design of the G2 for the CB-2000, CB-3000 and Curve. That might happen
in the future but no immediate guarantees.
Thank you for all of your patience. We have had hundreds of requests about the G3!!
________________
Curiosity Got The Best Of Us - We had some extra time on our hands so we thought that we would see how many
states and countries the KSD-G2 has sold in so far. (We were asked the other day for an exact number of units sold. All
we disclosed is that we have sold several thousand.) We launched our web site on October 16, 2004 and here's the results
as of April 24, 2006:
USA: AK, AL, AR, AZ, CA, CO, CT, DC, FL, GA, HI, ID, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS,
MT, MS, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TX, TN, UT, VA, VT, WA, WI, WV,
WY
Overseas: Argentina, Australia, Belgium, Brazil, Canada, Chile, China, England, Faulkland Islands, France, Germany,
Iceland, Ireland, Israel, Italy, Japan, South Korea, Netherlands, Newfoundland, New Zealand, Norway, Poland, Puerto
Rico, Russia, Saudi Arabia, Scotland, South Africa, Sweden, Switzerland
THANK YOU SO MUCH TO OUR MANY CUSTOMERS!!!
_________________
Six Companies As International Distributors - There are now six companies carrying the KSD-G2 overseas. Two are
in the United Kingdom, Denmark, Germany, Japan and The Netherlands.